C2C (corp-to-corp) means your company pays the consultant's company, not the consultant. W2 means the consultant is an employee, and the employer withholds and pays payroll taxes. 1099 means you pay an independent contractor as an individual, and they pay their own self-employment tax. On C2C, payroll tax and worker classification sit with the consultant's employer, and a corporation does not receive a Form 1099-NEC.
This guide is for the buyer who approves the invoice and the vendor that employs the consultant. Every tax statement on it was checked against IRS pages in November 2026, and each one is listed in the sources. It is general information, not legal or tax advice; for a decision about a specific worker, ask an accountant or employment lawyer.
W2 vs 1099 vs C2C at a glance
| W2 | 1099 | C2C | |
|---|---|---|---|
| The consultant is | An employee | An independent contractor, paid as an individual | An employee or owner of a company that bills your company |
| Who you pay | The person, through payroll | The person | The consultant's company, against invoices |
| Federal income tax withholding | The employer withholds, based on the employee's Form W-4 | Nobody withholds; the contractor pays their own | The consultant's company, for its own staff |
| Social Security and Medicare | Employer withholds the employee's share and pays the employer's share | The contractor pays self-employment tax | The consultant's company, as their employer |
| Federal unemployment tax (FUTA) | The employer pays it from its own funds | Not the payer's | The consultant's company, as their employer |
| Year-end form from the payer | Form W-2 | Form 1099-NEC, once payments reach the threshold | None for a corporation; see the paperwork section |
| Paperwork at the start | Form W-4 and onboarding | Form W-9 from the contractor, a services agreement | Form W-9 from the company, a master agreement and a work order |
| Benefits | From the employer, if it offers them | None from the payer | From the consultant's company, if it offers them |
The tax line explains why the same consultant quotes different numbers. A 1099 contractor pays self-employment tax of 15.3% on net earnings (12.4% for Social Security and 2.9% for Medicare), the share a W2 employer and employee would otherwise split. On C2C, the consultant's company carries the employer's share, benefits, insurance and the unpaid weeks between projects. So a C2C or 1099 rate sits above the W2 rate for the same job, and comparing it with a W2 salary without that adjustment overstates the cost.
How the IRS decides employee or contractor
The label on the paperwork does not decide the question. Under the common-law rules, the IRS looks at the whole relationship and at how far the payer has the right to direct and control the worker. It groups the evidence into three categories:
- Behavioral control: does the business control, or have the right to control, what the worker does and how they do the job?
- Financial control: does the payer control the business side of the job, such as how the worker is paid, whether expenses are reimbursed and who provides tools and supplies?
- Type of relationship: are there written agreements or employee-type benefits such as a pension plan, insurance or vacation pay, will the relationship continue, and is the work a key part of the business?
No single factor settles it. When status is still unclear, the business or the worker can file Form SS-8 and ask the IRS for an official determination; the IRS says a determination takes at least six months.
A business that treats an employee as a contractor without a reasonable basis can be held liable for employment taxes for that worker (the IRS points to Internal Revenue Code section 3509), and a worker who believes they were misclassified can file Form 8919 to report their share of uncollected Social Security and Medicare tax. The IRS relief provisions only help a business that had a reasonable basis and filed the required information returns consistently.
C2C does not switch these rules off. It moves the employer question to the consultant's own company, which is the one that has to classify and pay the consultant correctly. As the buyer, you are paying a business for a service. If you then manage a C2C consultant exactly like your own staff for years, ask your counsel how that looks, because state classification tests can be stricter than the federal one.
The paperwork each model needs
W2
Every employer in a trade or business that pays wages files a Form W-2 for each employee. It collects a Form W-4 for income tax withholding, runs payroll, deposits employment taxes and pays FUTA. If you hire a contractor onto your own W2, all of that becomes yours.
1099
You collect a Form W-9, which gives you the contractor's taxpayer identification number, and report nonemployee compensation on Form 1099-NEC. Under the IRS instructions revised in December 2026, the reporting threshold for tax years beginning after 2025 is $2,000 a year per payee, up from the old figure, and the IRS can adjust it for inflation from 2027. Form 1099-NEC is due by January 31 of the following year.
C2C
You still collect a Form W-9, this time from the company. Line 3a of the W-9 shows its federal tax classification, and an LLC that is not disregarded writes whether it is taxed as a C corporation, an S corporation or a partnership. Payments to a corporation, including an LLC taxed as a C or S corporation, are exempt from 1099-NEC reporting, with exceptions: payments for legal services, and payments by a federal executive agency, stay reportable. A single-member LLC that is disregarded reports its owner's classification, so paying it can be the same as paying an individual for 1099 purposes. Commercially, C2C runs on a master services agreement plus a work order for each consultant, with invoices against approved timesheets.
Example: one C2C requirement, from shortlist to start
Example: your team needs a Salesforce developer for six months, full time on US Central hours, remote, to finish a Service Cloud release. You confirm the requirement with CompanyBench and, within 48 hours, receive three masked profiles: two US-based consultants on C2C and one offshore consultant in India, each with a rate. You interview two of them through CompanyBench and ask each to walk through a trigger they refactored to stay under governor limits. You pick a US-based consultant whose employer is an S corporation. Because you buy through CompanyBench, you sign one agreement with CompanyBench, CompanyBench signs the matching work order with that employer, and the consultant starts once access is ready. Your monthly invoice comes from CompanyBench; the employer runs the consultant's payroll.
Run the same role as a direct C2C deal and the paperwork changes. You collect the employer's W-9, see the S corporation box on line 3a, and file no 1099-NEC for it. If the other US-based consultant's company had been a disregarded single-member LLC, the W-9 would show the owner as an individual, and your payments to it would be reportable on 1099-NEC once they reach the threshold. That is the case to take to your accountant before the first invoice, not in January.
Prime vendor, implementation partner and MSP: the C2C chain
Large US IT engagements run through a chain of companies, each with its own agreement and margin. The terms below are industry usage, not legal definitions, and firms use them loosely. Ask who is in the chain before you sign or submit anyone.
| Term | Who it is | What it does in the chain |
|---|---|---|
| End client | The company where the work is done | Owns the project and approves the consultant and the timesheets |
| MSP and VMS | A managed service provider and its vendor management system | Large buyers route contractor requests through an MSP, which runs the VMS where approved suppliers submit |
| Implementation partner | A systems integrator delivering a project for the end client | Holds the project agreement and staffs part of it with contractors |
| Prime vendor | A supplier on the end client's or partner's approved list | Bills the client side and subcontracts to other vendors when it lacks the person |
| Sub-vendor or layer | Another staffing firm between the prime and the employer | Adds a margin and passes the requirement down |
| Employer | The consultant's own company (the C2C vendor) | Employs the consultant, runs payroll and invoices the next party up |
Every extra layer takes a margin out of the same bill rate and adds a party who relays messages without owning them. That is why consultants and buyers both ask how many layers sit between them.
Where CompanyBench sits
CompanyBench is one layer: the contracting party between the buyer and the consultant's employer. You sign one agreement with CompanyBench. CompanyBench signs a matching back-to-back agreement with the vendor that employs the consultant. The consultant stays on the vendor's payroll, so payroll tax and classification stay with the vendor. You get one invoice a month for approved timesheets, and CompanyBench pays the vendor.
- For buyers: you pay a business for a service and do not add anyone to your payroll. IT staff augmentation covers how the engagement runs day to day.
- For US C2C vendors: you submit your own employees, bill CompanyBench, and are paid after the client approves timesheets. See C2C requirements for vendors.
- For offshore work: the employer is an Indian IT company and the consultant works remotely; no 1099 question arises for you. See offshore developers from India.
- By skill: the technologies hub lists the roles we fill, and the US home page explains the model in one screen.
When to ask an accountant or lawyer
- You want to pay an individual, or a single-member LLC, rather than a corporation.
- You plan to keep the same contractor in a role your employees also do, under the same managers, for a long time.
- The consultant works in a state whose classification rules you have not checked.
- You are converting a contractor to an employee, or an employee to a contractor.
- A vendor's W-9 is missing, incomplete or shows a classification you did not expect.
Frequently asked questions
What does C2C mean in a job post?
C2C means the hiring side will pay a company, not the consultant as an individual. The consultant has to be employed by, or own, a company that signs the work order and sends invoices. A post marked W2 only means the hiring side wants the person on its own payroll, and a 1099 post means it will pay the person as a self-employed contractor.
What is the difference between W2 and 1099?
A W2 worker is an employee: the employer withholds income tax, withholds and pays Social Security and Medicare, and pays federal unemployment tax. A 1099 worker is an independent contractor who pays their own income tax and 15.3% self-employment tax, and receives a Form 1099-NEC from each payer once payments reach the IRS threshold.
What is C2C vs 1099?
On 1099 you pay an individual and report the payment on Form 1099-NEC once it reaches the threshold. On C2C you pay a company that employs the consultant, and payments to a corporation are exempt from 1099-NEC reporting except for items such as legal services. Tax and classification duties sit with that company, not with you or the consultant.
Is C2C better than W2?
Neither is better in general; it depends on who carries the cost. For a buyer, C2C moves payroll and employment administration to the consultant's company. For the consultant, C2C pays a higher rate, but their company covers payroll tax, benefits and gaps between projects. Compare total cost per hour worked, not the headline rate.
Do I send a 1099 to a C2C vendor?
Not if the vendor is a corporation, including an LLC taxed as a C or S corporation, unless the payment is for legal services or another listed exception. Collect a Form W-9 and read line 3a. If it shows an individual, a sole proprietor or a disregarded single-member LLC, payments of $2,000 or more in a year are reportable on 1099-NEC.
What is a prime vendor in IT staffing?
A prime vendor is a supplier on the end client's or the implementation partner's approved list that bills that side directly. When it has no suitable consultant, it passes the requirement to other vendors, each adding a margin. A role taken from a prime vendor has fewer layers, and so less margin taken from the bill rate, than one passed further down.
Is it illegal to put a full-time worker on 1099?
Paying someone on 1099 is legal; misclassifying an employee as a contractor is not. Hours alone do not decide it. The IRS weighs behavioral control, financial control and the type of relationship, and a business without a reasonable basis for the classification can owe the employment taxes for that worker under section 3509. State tests can be stricter.
Who pays more tax, a 1099 contractor or a W2 employee?
On the same earnings, the 1099 contractor pays more payroll tax directly. They owe self-employment tax of 15.3% on net earnings, covering both the Social Security and Medicare shares, while a W2 employee pays only the employee's share and the employer pays the rest. That gap is one reason contractor rates sit above W2 rates.
Tell us what you need
A vetted shortlist within 48 hours of confirming the requirement. No fees until someone starts.
Sources
- IRS: Independent contractor (self-employed) or employee? (common-law rules, Form SS-8, IRC section 3509, Form 8919)
- IRS: Understanding employment taxes (income tax withholding, Social Security and Medicare, FUTA)
- IRS: Self-employment tax (Social Security and Medicare taxes)
- IRS: About Form W-2, Wage and Tax Statement
- IRS: About Form 1099-NEC, Nonemployee Compensation
- IRS: Instructions for Forms 1099-MISC and 1099-NEC, revised 12/2026 (payments to corporations, the threshold for tax years beginning after 2025, January 31 due date)
- IRS: About Form W-9, Request for Taxpayer Identification Number and Certification
- IRS: Instructions for the Requester of Form W-9 (line 3a tax classification, disregarded entities)
Last reviewed November 22, 2026.
More for United States
- CompanyBench US
- C2C requirements for vendors and bench sales teams
- Hire .NET developers on contract: C#, ASP.NET Core and .NET upgrades
- Hire AI developers on contract: ML, LLM and MLOps engineers
- Hire AWS consultants and cloud engineers on contract
- Hire Azure consultants and cloud engineers on contract
- Hire contract developers and IT consultants by technology
- Hire data engineer consultants on contract

